1" Transom Spacers
Necessary for mounting Verado motors over 200HP on extreme series jack plates
These spacers are made out of strong aluminum alloy and machined flat on both sides. Adding these spacers is the simplest way of getting that extra couple m.p.h.. These spacers go between the transom and the engine’s mounting bracket or they can also be installed between the jack plate and engine.
Standard length bolts are suitable for use with 1" spacers, longer bolts are only required for 2" spacers.
By applying the set back spacers to the transom, you are moving the center of gravity of the hull further back. By doing this you are re-balancing the boat which allows the hull to remain at its present attitude with less trim. Therefore, you have more power to push the boat forward rather than to hold the bow up.
