Keep your transducer signal clear with the best foul-release technology on the market
Transducer Defence at it's best with Foulfree
Fouling on the face of transducers can reduce their sensitivity, decreasing bottom-echo returns and fish targets. Keep your transducer performing at it's peak with Foulfree. The proprietary clear coat forms a slick surface marine growth can't grab onto, keeping your transducer surfance clean and clear.
Application Tip: For better adhesion of Foulfree Transducer Coating on plastic fairing (polyethylene, polypropylene, nylon, etc.), you may need to use a piece of 40 grit sandpaper - NOT Included.
Why use Foulfree?
Check this out Below the difference between seeing fish and NOT seeing Fish. The choice is clear!
Why do I need foulfree?
Fouling on the face of transducers can reduce their sensitivity. decreasing bottom-echo returns and fish targets and reducing the detail on sonar image you recieve. Foulfee forms a slick surface marine growth can't grab onto, keeping your transducer surface clean and clear.
Is Foulfree environmentally friendly?
Yes. Foulfree is specialized foul-release coating that does not poison marine growth or release any toxins into the marine environment.
Can Foulfree damage my transducer?
No. Foulfree has been tested and proven to have no adverse affects on transducers
How long will Foulfree last?
Foulfree lasts a minimum of 12 months. with an even longer service life in cooler climates
Physical Properties & Performance:
- Dry Time: 20 minutes touch dry 8 hours hard dry at 20°C
- Recoat Time: Between 8 hours and 5 days at 20°C
- Zero toxic substances. Good fouling prevention properties
- Clear coating
- Long service life Easily recoated
- Foulfree is Airmar certified and has no adverse effects on transducers.
Please note: This is item is classified as dangerous goods and can only be sent by standard shipping to locations in Australia.
- mfg_code:
- FF15KIT
