Racor - RK30880 - Water Detection Module
The RK30880 model features full built-in water detection capability and operates from 12 or 24 vdc.
The water sensor is a component in the water detection system and works with CPU controlled systems (Multiplex units must use one sensor for each collection bowl).
These all-in-one WIF sensor have a self-diagnosis feature at each initial power up. The yellow wire sends a 1 to 2 second ground (-) signal to power a lamp or trigger a relay (< 1 amp, max). The units will automatically reset once the water is drained away from the water sensor tips. Wiring instructions are supplied with each water detection module.
All Racor water sensors are 100% electrically tested and hermetically sealed to keep out moisture and fuel. 1/2-20” threads with the SAE J1926 o-ring seal design.
Indcludes:
- 3 wire water sensor with quick disconnect with flying harness
- Warning light
Suits Racor Filter Assemblies:
B120
S3201, S3205, S3206, S3229, S3228
B32002 (S3202)
B32003 (S3203)
B32004 (S3204)
B32007p (S3207p)
B32008p (S3208p)
B32009 (S3209)
B320012 (S3212)
B32016 (S3216)
Optional ( FBO10, FBO14)
RVFS 1, RVFS 2, RVFS3
Australian Dollars
